receiver, high iip3, smd 40.5 - 43.5 ghz rev. v1 madc - 010736 1 1 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 1 functional schematic pin configuration 3,4 ^restrictions on hazardous substances, european union directive 2011/65/eu. 3. the exposed pad centered on the package bottom must be connected to rf and dc ground. 4. macom recommends connecting unused package pins to ground. 5. if pins i* and q* may be left open (unused) for un - balanced if operation. ordering information 1,2 part number package madc - 010736 - 000000 bulk quantity madc - 010736 - tr0200 200 piece reel madc - 010736 - tr0500 500 piece reel madc - 010736 - 001smb sample evaluation board features ? integrates lna, image reject mixer, lo doubler, and lo buffer ? 3.5 db noise figure ? 12 db conversion gain ? 30 dbc image rejection ? 9 dbm input third order intercept @ 2 ghz if ? lead - free 6 mm laminate package ? rohs^ compliant and 260c reflow compatible description the madc - 010736 is an integrated usb receiver that has a noise figure of 3.5 db and a typical conversion gain of 12 db. the integrated mixer provides image rejection of 30 dbc. i and q mixer outputs are provided and an external 90 hybrid is required to complete the image rejection function. the device integrates an lna, image reject mixer and lo buffer/doubler within a 6 mm laminate package. it is ideally suited for 42 ghz band point - to - point radios. each device is 100% rf tested to ensure performance compliance. the part is fabricated using an efficient phemt process. the mttf is > 1,000,000 hours at a 150 o c junction temperature. pin no. function 1 v d 3 2 v g 3 3 lo 4 q* input 5 5 q input 6 i input 7 i* input 5 8 v g 4 9 rf 10 v g 1 11 v d 1 12 v g 2 13 v d 2 1. reference application note m513 for reel size information. 2. all sample boards include 3 loose parts. q * q i i * i r m l n a b u f b u f 2 x q * q i i * v g 4 r f v d 2 v g 2 v d 1 v g 1 v d 3 v g 3 l o 1 2 3 4 5 6 7 1 3 1 2 1 1 1 0 9 8
receiver, high iip3, smd 40.5 - 43.5 ghz rev. v1 madc - 010736 2 2 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 2 parameter units min. typ. max. frequency range (rf) ghz 40.5 43.5 frequency range (lo) ghz 18.5 21.75 frequency range (if) ghz dc 3.5 conversion gain db 10 12 image rejection dbc 30 input ip3 dbm 6 noise figure db 3.5 5.0 lo power dbm 0 if return loss db 15 rf return loss db 18 lo return loss db 15 dc current (id1+id2+id3) ma 290 electrical specifications 6 : t b = 25c, v d1,2,3 = 4.0 v, i d1 = 10 ma, i d2 = 100 ma, v g3 = - 0.4 v, v g4 = - 3 v, if = 3.5 ghz maximum operating ratings 7,8 parameter absolute maximum input power +5 dbm drain supply voltage +4.3 volts operating temperature - 40c to +85c junction temperature +150c storage temperature - 55c to +150c 7. exceeding any one or combination of these limits may cause permanent damage to this device. 8. macom does not recommend sustained operation near these survivability limits. handling procedures please observe the following precautions to avoid damage: static sensitivity gallium arsenide integrated circuits are sensitive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices. 6. apply gate voltages prior to drain voltages. adjust vg1, vg2 and vg3 between C 1.0 and C 0.1 v to achieve specified drain current . typical current, 290 ma = 10 ( id1) + 100 (id2) + 180 (id3). refer to app note [1] for biasing details.
receiver, high iip3, smd 40.5 - 43.5 ghz rev. v1 madc - 010736 3 3 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 3 conversion gain @ 2.0 ghz if conversion gain @ 3.5 ghz if ip3 @ 3.5 ghz if ip3 @ 2.0 ghz if typical performance curves: t a = 25c image rejection @ 3.5 ghz if image rejection @ 2.0 ghz if 0 5 10 15 20 25 40.5 41.0 41.5 42.0 42.5 43.0 43.5 input ip3 output ip3 frequency (ghz) -40 -30 -20 -10 0 40.5 41.0 41.5 42.0 42.5 43.0 43.5 frequency (ghz) 0 5 10 15 20 25 40.5 41.0 41.5 42.0 42.5 43.0 43.5 input ip3 output ip3 frequency (ghz) -40 -30 -20 -10 0 40.5 41.0 41.5 42.0 42.5 43.0 43.5 frequency (ghz) 0 5 10 15 20 25 40.5 41.0 41.5 42.0 42.5 43.0 43.5 frequency (ghz) 0 5 10 15 20 25 40.5 41.0 41.5 42.0 42.5 43.0 43.5 frequency (ghz)
receiver, high iip3, smd 40.5 - 43.5 ghz rev. v1 madc - 010736 4 4 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 4 p1db @ 2.0 ghz if lo and 2xlo to rf isolation noise figure rf return loss typical performance curves: t a = 25c lo return loss if return loss -70 -60 -50 -40 -30 -20 -10 0 37 38 39 40 41 42 43 44 1xlo 2xlo 2xlo (ghz) -10 -5 0 5 10 40.5 41.0 41.5 42.0 42.5 43.0 43.5 input output frequency (ghz) -40 -30 -20 -10 0 40.5 41.0 41.5 42.0 42.5 43.0 43.5 frequency (ghz) -50 -40 -30 -20 -10 0 0 1 2 3 4 frequency (ghz) -50 -40 -30 -20 -10 0 16.75 17.75 18.75 19.75 20.75 21.75 frequency (ghz) 0 1 2 3 4 5 6 7 8 40.5 41.0 41.5 42.0 42.5 43.0 43.5 if = 2.0 ghz if = 3.5 ghz frequency (ghz)
receiver, high iip3, smd 40.5 - 43.5 ghz rev. v1 madc - 010736 5 5 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 5 app note [1] biasing - the madc - 010736 is operated by biasing v d 1, v d 2, and v d 3 at 4.0 v. the corresponding drain currents are set to 10 ma, 100 ma, and 180 ma respectively. v g 4 requires a fixed voltage bias of nominally C 3.0 v. it is recommended to use active bias on v g 1, v g 2, v g 3 to keep the currents in v d 1, v d 2, and v d 3 constant, in order to maintain the best performance over temperature. depending on the supply voltages available and the power dissipation constraints, the bias circuits may include a single transistor or a low power operational amplifier, with a low value resistor in series with the drain supply to sense the current. make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply. app note [2] i/q - for highest gain, best image rejection and lowest noise figure all 4 if ports should be used. i/ i* and q/q* will combine through two 180 degree hybrid couplers generating inphase and quadrature phase components. inphase and quadrature signals then need to be combined through 90 degree hybrid combiner to create if output. app note [3] board layout - it is recommended to provide 100 pf decoupling capacitors as close to the bias pins as possible. additional 10 nf and 1 f on each of the bias lines are recommended placed a distance further away. 9 0 d e g h y b r i d i f o u t p u t q * q i i * v g 4 r f v d 2 v g 2 v d 1 v g 1 v d 3 v g 3 l o 1 2 3 4 5 6 7 1 3 1 2 1 1 1 0 9 8 q * q i i * i r m l n a b u f b u f 2 x 1 8 0 d e g h y b r i d 1 8 0 d e g h y b r i d
receiver, high iip3, smd 40.5 - 43.5 ghz rev. v1 madc - 010736 6 6 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macomtech.com for additional data sheets and product information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 6 lead - free 6 mm laminate package ? ? reference application note s2083 for lead - free solder reflow recommendations. meets jedec moisture sensitivity level 3 requirements. top view side view bottom view recommended substrate footprint madc010736 aaaaa pyywwn uc010515 aaaaa pyywwn markings: line 1: macom part number line 2: lot wafer number line 3: p = philippines (country of origin) yyww: date stamp (year - year - week - week) n = nickel/gold plating all dimensions are in mm. uc010515 aaaaa pyywwn markings: line 1: macom part number line 2: lot wafer number line 3: p = philippines (country of origin) yyww: date stamp (year - year - week - week) n = nickel/gold plating all dimensions are in mm.
|
